72
Section XV · Base metals and articles of base metal
Iron and steel
167 subheadings in 29 headings. Open one for the published General, Special and Column 2 rates of every tariff line beneath it.
7201Pig iron and spiegeleisen in pigs, blocks or other primary forms
7202Ferroalloys
- 7202.11Containing by weight more than 2 percent of carbon:
- 7202.19Other:
- 7202.21Containing by weight more than 55 percent of silicon:
- 7202.29Other
- 7202.30Ferrosilicon manganese
- 7202.41Containing by weight more than 4 percent of carbon
- 7202.49Other:
- 7202.50Ferrosilicon chromium
- 7202.60Ferronickel
- 7202.70Ferromolybdenum
- 7202.80Ferrotungsten and ferrosilicon tungsten
- 7202.91Ferrotitanium and ferrosilicon titanium
- 7202.92Ferrovanadium
- 7202.93Ferroniobium:
- 7202.99Other:
7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms
7204Ferrous waste and scrap; remelting scrap ingots of iron or steel
7205Granules and powders, of pig iron, spiegeleisen, iron or steel
7206Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)
7207Semifinished products of iron or nonalloy steel
7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208.10In coils, not further worked than hot-rolled, with patterns in relief:
- 7208.25Of a thickness of 4.75 mm or more:
- 7208.26Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27Of a thickness of less than 3 mm
- 7208.36Of a thickness exceeding 10 mm
- 7208.37Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39Of a thickness of less than 3 mm
- 7208.40Not in coils, not further worked than hot-rolled, with patterns in relief:
- 7208.51Of a thickness exceeding 10 mm
- 7208.52Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54Of a thickness of less than 3 mm
- 7208.90Other
7209Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209.15Of a thickness of 3 mm or more
- 7209.16Of a thickness exceeding 1 mm but less than 3 mm
- 7209.17Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18Of a thickness of less than 0.5 mm:
- 7209.25Of a thickness of 3 mm or more
- 7209.26Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28Of a thickness of less than 0.5 mm
- 7209.90Other
7210Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210.11Of a thickness of 0.5 mm or more
- 7210.12Of a thickness of less than 0.5 mm
- 7210.20Plated or coated with lead, including terne-plate
- 7210.30Electrolytically plated or coated with zinc
- 7210.41Corrugated
- 7210.49Other
- 7210.50Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61Plated or coated with aluminum-zinc alloys
- 7210.69Other
- 7210.70Painted, varnished or coated with plastics:
- 7210.90Other:
7211Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
7212Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated
7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel
7214Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7215Other bars and rods of iron or nonalloy steel
7216Angles, shapes and sections of iron or nonalloy steel
- 7216.10U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21L sections
- 7216.22T sections
- 7216.31U sections
- 7216.32I sections (standard beams)
- 7216.33H sections
- 7216.40L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61Obtained from flat-rolled products
- 7216.69Other
- 7216.91Cold-formed or cold-finished from flat-rolled products
- 7216.99Other
7217Wire of iron or nonalloy steel
7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7219Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219.11Of a thickness exceeding 10 mm
- 7219.12Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14Of a thickness of less than 3 mm
- 7219.21Of a thickness exceeding 10 mm
- 7219.22Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24Of a thickness of less than 3 mm
- 7219.31Of a thickness of 4.75 mm or more
- 7219.32Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35Of a thickness of less than 0.5 mm
- 7219.90Other
7220Flat-rolled products of stainless steel, of a width of less than 600 mm
7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
7223Wire of stainless steel
7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7225Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225.11Grain-oriented
- 7225.19Other
- 7225.30Other, not further worked than hot-rolled, in coils:
- 7225.40Other, not further worked than hot-rolled, not in coils:
- 7225.50Other, not further worked than cold-rolled (cold-reduced):
- 7225.91Electrolytically plated or coated with zinc
- 7225.92Otherwise plated or coated with zinc
- 7225.99Other
7226Flat-rolled products of other alloy steel, of a width of less than 600 mm
7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
- 7228.10Bars and rods, of high-speed steel
- 7228.20Bars and rods, of silico-manganese steel:
- 7228.30Of tool steel (other than high-speed steel):
- 7228.40Other bars and rods, not further worked than forged
- 7228.50Other bars and rods, not further worked than cold-formed or cold-finished:
- 7228.60Other bars and rods:
- 7228.70Angles, shapes and sections:
- 7228.80Hollow drill bars and rods
7229Wire of other alloy steel
Source: U.S. International Trade Commission (USITC) — 2026 HTS Revision 12, released 2026-07-21. Listed rates are not always the rate collected — verify with your licensed customs broker.